-
Bosch Gsr 10 8-2-li Manual카테고리 없음 2020. 3. 18. 22:24
Additional dataBattery voltage.10.8 VTorque (soft/hard/max.)11/28/- NmNo-load speed (1st gear / 2nd gear)0 – 400 / 0 – 1,300 rpmBattery typeLithium-ionMax. Impact rate19,500 bpmChuck capacity, min./max.0.8 / 10 mmTorque settings20+2Tool holderThree-jaw chuckDrilling diameterMax. Drilling diameter in wood19 mmMax. Drilling diameter in steel6 mmMax. Drilling diameter in masonry.8 mmMax.
Screw diameter.7 mmScrew diameterMax. Drilling diameter in wood19 mmMax.
Drilling diameter in steel6 mmMax. Drilling diameter in masonry.8 mmMax. Screw diameter.7 mm. Highlighted Data The A-rated noise level of the power tool is typically as follows: Sound pressure level 96 dB(A); Sound power level 85 dB(A).
Uncertainty K= 3 dB.
Bosch Gsr 10 8-2-li Professional Manual
Bosch Gsr 10.8-2-li Manual
Written on, 13:16 o’clockHi MartinIt is unlikely that the GSR10.8 is less ‘torquey’ than the PSR200. Make sure it is in drilling mode and is in first gear when making the test.Please note that on the GSR the highest torque control setting on the adjustment collar (20) does not provide the maximum torque as quoted in the manual, it may be as little as 30% of this maximum capability - the maximum torque test is always done in first gear with the torque control clutch disabled, i.e. Written on, 15:19 o’clockOriginal from Bob Community Team on, 12:16.Please note that on the GSR the highest torque control setting on the adjustment collar (20) does not provide the maximum torque as quoted in the manual, it may be as little as 30% of this maximum capability - the maximum torque test is always done in first gear with the torque control clutch disabled, i.e. The setting collar in the ‘Drill’ position.Do you mean that the highest torque setting (20) in 1st gear provides only 30% the torque power of drill mode??Regardsjusko.